Description
2.4G RC Drone 3 in 1 Quadcopter Glider Airship Airplane Hovercraft RC Multi-functional Aircraft Christmas Gift Toy for Kid
Product parameters:
Drone battrey: 3.7V 300mAh lithium battery
Remote control battery: 4 * 1.5v AAAA
Control distance: About 50M
Charging time: About 60 minutes
Remote control signal: 2.4GHz
Speed: 3 Block speed
Flight time:
Quad-axis: 7 minutes
Gliding: 7 minutes
Airship: 10 minutes
Package Included:
1 × Drone
1 × Remote control
1 × Battery (3.7V 300MAH)
1 × Charging cable
1 × Airship
2 × Sticker
2 × Glider
Description:
3 modes: glider mode, four-axis mode, airship mode
DIY three-in-one intelligent remote control glider, hovercraft, drone.
Ground mode is free to travel on land.
Four-axis mode makes it easy to fly at high altitudes.
Fixed-wing glider mode for easy gliding flight dreams.
Function: Up / down, Forward / backward, Turn left / right, Sideward flight, Air Flying Mode (Aircraft alone), Airship Mode, Glide Mode, 3-level flight speed, Headless Mode, rolling 360 °
3 in 1 Drone
Drone—-Glider—-Car
All in one
Droe—-Glider—-Airship
2.4GHz—-3D tumbling—-Headless mode
Colorful lights—-3 speeds—-Remote control
4-Aixs Gyroscope
Stable flight , 3D roll,3D tumbling headless mode
Glider mode
Protect the body
Forward/Backward/turn left/turn right
Airship mode
Flight is smooth and you can play drifting
Headless mode
Never Get lost
Multiple actions
Up down/Forward/Backward/turn left/turn right
3D dumbling
3D roll can easily acheived when flying above 3m altitude
3 Speeds
Can switch Fast/Medium/Low speed
Low speed—-Medium speed—-High speed
Remote control
Accessories display
Drone*1—-Built-in lithium battery*1—-Remote control*1—-USB charfer*1—-Glider wings*1—-Airship case*1
Size display
Drone size : 9*9*3cm
Airship size : 12.5*11*5.5cm
Glider size : 23.5*14*4.5cm
Coler box size : 39*22.5*7.5cm
Drone mode installation steps :
1, Insert the battery into the slot
2, Conect the wires
3, Place the wire in the bottom center psition
Airship mode installation steps :
1, Gently push the red button to ajust the rear propeller to 90 degrees
2, Put the battery into the slot
3, Conect the wires
4, Align the front protective ring of the drone with the card and press
5, Insert the card into the back edge of the prective ring , and then press the rear prective ring
6, press the remote control switch
7, Push the throttle lever up and down once
8, Press airship mode
9, The remote control makes a dripping sound
Glider mode installation steps :
1, Gently push the red button to ajust the rear propeller to 90 degrees
2, The glider must be locked before installing the battery
3, Gently pull the edge snap button
4, Gently pull into the rear buckle
5, Pull the battery into the slot
6, Conct the wires
7, Press the remote control switch
8, Push the throttle lever up and down once
9, Press glider mode
10, The light on top of the drone turns red and can take off
Reviews
There are no reviews yet.